UNI-2500, 2502, 2504
The UNI-2500 UNI-BUG III Single Torch Kit is equipped for the mounting of a single torch and provides components
to manually adjust the torch in the vertical and horizontal plane. The UNI-BUG III provides programmable control for stitch
or continuous welding and is designed to mount and run on the top edge of a flat bar or stiffener with a minimum height of 2"
(50 mm) and a maximum width of 2" (50 mm). The machine will turn on a radius down to 6" (160 mm). The unit will travel
at speeds from 4 to 75 inches per minute (102-1905 mm/min).
UNI-2600, 2602, 2604
The UNI-2600 UNI-BUG III Dual Torch Welding Kit is the same as the UNI-2500, but is equipped for the mounting of
two welding torches and provides components to manually adjust either torch in the vertical and horizontal plane.
UNI-2700, 2702, 2704
The UNI-2700 UNI-BUG III Dual Torch Bulb Profile Welding Kit is equipped for the mounting of two welding torches and
provides components to independently adjust either torch in the vertical and horizontal plane. The unit features programmable
control for stitch or continuous welding and is designed for straight line welding of bulb flats. This unit will mount and run on bulb
sizes from 140 mm to 430 mm. The unit will travel at speeds from 4 to 75 inches per minute (102-1905 mm/min).
| Brand |
BUG-O SYSTEMS |
| Power |
UNI-2500, 2600, 2700, 2800, 2900 110 VAC/50-60/1 |
| Power |
UNI-2502, 2602, 2702, 2802, 2902 240 VAC/50-60/1 |
| Power |
UNI-2504, 2604, 2704, 2804, 2904 42 VAC/50-60/1 |
| Welding Speed Range |
4 ipm to 75 ipm (102 to 1905 mm/min) |
| Skip Speed |
75 ipm (1905 mm/min) |
| Minimum Stiffener Height |
2'' (50.8 mm) |
| Net Weight |
27 lb. (12.2 kg) |